Preinstallation Planning
Configuration and Installation Process
Customized Configuration
Description
Customized
configuration
planning process
This customized configuration procedure applies if the site is not a private
network, or if other default parameter values are not appropriate.
Because the SLC ConnectReach system supports many interfaces and protocols,
the SLC ConnectReach system configuration utility offers a large number of
configuration parameters. However, almost all parameters have default values; if
a parameter's default is appropriate for the customer site, you do not need to set
the parameter. Default values, where applicable, are shown in parentheses below
and in bold in the worksheet. All parameters listed below are described in more
detail in Chapter 4, "Configuring the SLC ConnectReach System".
NOTE:
Before starting any configuration, check and record the installed feature
keys. For information about displaying the enabled features, refer to
Chapter 4, "Configuring the SLC ConnectReach System".
363-208-050
Issue 4
June 2002
3-7