Lucent Technologies SLC ConnectReach User & Service Manual page 406

Configure/Monitor and Upgrade Software for the SLC
ConnectReach System Using a Web Browser
Executing Commands from the Main Menu
Using a Web Browser to Upgrade
Software (Continued)
Displaying and
using the network-
upgrade screen
(continued)
8-18
Issue 4 June 2002
Step Procedure
3 After you click the Update button, the network upgrade screen refreshes.
Read the warning displayed at the bottom of the screen (shown in the
following figure) and follow the instructions to continue.
While the SLC ConnectReach system is rebooting, the screen shown
below appears.
4 Wait approximately 30 seconds and then click on the location indicated to
continue with the procedure.
5 When the login screen appears, enter your login name and password.
363-208-050
(Continued on next page)