®
Configuring the SLC
ConnectReach
Using the Configuration Commands
Configuring the Default Firewall
(Continued)
Viewing default
firewall
configuration
settings (continued)
™
System
The IP inbound filter group settings for the default IP filter plus server sample
configuration shown in the following figure are as follows:
1Filter:
permit
2Filter:
permit
3Filter:
permit
4Filter:
5Filter:
6Filter:
7Filter:
8Filter:
9Filter:
10Filter:
11Filter:
12Filter:
13Filter:
14Filter:
15Filter:
16Filter:
defaultAction
denyAll
NOTE:
TCP/UDP ports: 0-1023 are reserved; 1024 and above are unreserved.
NOTE:
"255.255.255.255" is a netmask.
dst 207.104.144.1 255.255.255.255 default
tcpport > 1023
udpport>1023
ping
(Continued on next page)
Issue 4
363-208-050
June 2002
4-135