Lucent Technologies SLC ConnectReach User & Service Manual page 432

Software Upgrade, Maintenance, and Trouble Clearing
Maintenance Procedures
Using the Archive Command to Upload/
Download Configuration Settings
(Continued)
Downloading an
archived
configuration using
a modem
9-18 Issue 4 June 2002
Use the following procedure to download archived configuration settings from a
remote computer to a SLC ConnectReach system using a modem:
NOTE:
To ensure proper transfer of archived configuration settings, set the baud
rate of the SLC ConnectReach system and the FTP server terminal
emulator to 9,600 baud.
NOTE:
The archived configuration must be present on the computer from which
you perform the procedure, or on a network drive to which the computer
has access.
Step Procedure
1 From the remote computer, start a terminal application and dial the
modem connected to the SLC ConnectReach system.
2 At the login prompt, enter your login name and password.
3 At the Main Menu prompt, enter the archive command.
> archive
4 At the Archive prompt, enter the tty-download command.
(archive)> tty-download
5 The system responds with the following message:
Set your terminal program to send the text file now...
6 Use HyperTerminal to send the configuration data by selecting Transfer,
Send Text File, and specifying the same file name used for the upload
procedure.
363-208-050
(Continued on next page)