Configuration Examples
Examples of the Different Methods of Configuring the
®
™
SLC
ConnectReach
System
Customized Configuration Example
Configuration site
conditions
Configuration
settings that need
verification
This configuration applies to sites that:
Do not use private IP network addresses.
3
Have a telephone system and T1 link to the CO for which the SLC
3
ConnectReach system defaults are not always appropriate. Chapter 4,
"Configuring the SLC
for all parameters.
Under these conditions, you need to verify the settings of all configuration
parameters and determine which need to be adjusted.
®
™
ConnectReach
System", describes the defaults
363-208-050
(Continued on next page)
B-7
Issue 4
June 2002