Installation
®
Mount the SLC
ConnectReach
Desktop Mount
Install four rubber
feet
™
System
Use the following procedure to attach the four included rubber feet to the bottom
of the SLC ConnectReach system unit to be placed on a desktop.
NOTE:
Mounting brackets are not used for a desktop installation.
Step
Procedure
1
Remove the protective covering from the self-adhesive surface on the
rubber feet.
2
Place the rubber feet in the recessed areas located on the bottom of the
case.
3
Press firmly to ensure good adhesion of the rubber feet.
363-208-050
Issue 4
June 2002
5-31