SLC ConnectReach System Monitoring
Using the Statistics Command to Display System
Elements Status
Displaying Statistics for Frame Relay
PVCs
Introduction
At the statistics prompt, enter the show-pvc command to see statistics for a
specific Frame
Relay pvc or all pvcs on the SLC ConnectReach system:
(statistics)>
Enter the parameter to see the statistics, as detailed in the following table.
To
'LVSOD\ RQH RU DOO 39&V
'LVSOD\ RQOLQH KHOS
([LW WKLV VXEPHQX
A report of the current pvc statistics similar to the following example is displayed:
Frame-Relay PVC
Name: PVC2
DLCI: 506 PvcState: ACTIVE Interface: FR
IPAddr: 192.168.11.2
RxFrames: 4742472 RxOctets: 1027355809
TxFrames: 6108392 TxOctets: 762619571
show-pvc
Enter this command
show-pvc
Help
Exit
363-208-050
...and one of these options
(1...30), all
(Continued on next page)
7-39
Issue 4
June 2002