Lucent Technologies SLC ConnectReach User & Service Manual page 177

®
Configuring the SLC ConnectReach
Using the Configuration Commands
Configuring Dialing (Continued)
Key commands
™
System
The key commands for the SLC ConnectReach system's Dialing menu are as
follows:
Detect-insert
Digit
Range
X
Local
Timeout
This command requires three values. The first value is
the row number of the detect table. The second value
refers to the output-row in the output table. The third
value is where you assign a search pattern. When
digits are dialed, the software looks at all patterns and
tries to find a match. When the first match is found, the
associated output table row is used to complete the
call.
The pattern defines a range of numbers that match
sequences of up to 14 digits. The syntax for the
pattern is as follows:
One of the following: 0 1 2 3 4 5 6 7 8 9
matches that digit (for example, 3).
[digit-digit] matches any digit (for
example, 2-4).
X matches any digit (examples:
XXXXXXX matches any seven-digit
number, 413XXXX matches 4134361,
413436XXXX matches 4134361234).
L matches any four digits (for example,
413L matches 413 followed by any four
numbers).
T accepts additional digits waiting for
interdigit timeout (for example, 413T
matches both 4134361234 and
4134361).
363-208-050
(Continued on next page)
Issue 4 June 2002 4-91