Lucent Technologies SLC ConnectReach User & Service Manual page 282

Installation
®
Mount the SLC ConnectReach
Wall Mounting (Continued)
Wall mount using
hinged wall mount
assembly
(continued)
5-30 Issue 4 June 2002
™
System
Step Procedure
6 With the SLC ConnectReach system unit oriented in the same manner as
the previous unit(s), insert the unit between the extension brackets and
secure the unit to the brackets using the screws provided. Tighten all
extension bracket screws.
7 If additional SLC ConnectReach system units are to be installed in the
hinged wall mount assembly, repeat the procedure from Step 5 for the
next unit to be installed. Otherwise, secure the mounted units against the
wall using the two captive screws that screw into the existing holes on the
top and bottom edges of the hinged assembly plate.
363-208-050