Lucent Technologies SLC ConnectReach User & Service Manual page 501

EZ Config
Using EZConfig
Initial Configuration of the SLC
ConnectReach System (Continued)
Procedure
(continued)
Action/Prompt/Response
10. EZConfig will save
the configuration
changes to the
NVRAM, restart
the SLC
ConnectReach
system and return
to the main menu.
Restarting the SLC
ConnectReach
system will take a
moment, please
wait a few seconds
before clicking on
another link. To
configure the data
parameters, click
on the Data
Configuration
button.
11. Enter the number
of DS0s being
used for data and
click the Next
button.
Screen Display
363-208-050
(Continued on next page)
Issue 4 June 2002 E-9