Lucent Technologies SLC ConnectReach User & Service Manual page 433

Software Upgrade, Maintenance, and Trouble Clearing
Maintenance Procedures
Using the Archive Command to Upload/
Download Configuration Settings
(Continued)
Downloading an
archived
configuration using
a modem
(continued)
Step Procedure
7 After the download completes, the system responds with:
Configuration downloaded successfully.
Save your changes:
(Archive) > save
(archive)> exit
8 At the Main Menu, use the warm-start command to reboot the SLC
ConnectReach system:
> warm-start
NOTE:
If the download configuration changes the beginning channel
number of any range in the DS0 Provisioning menu, you must use
the cold-start command to reboot the SLC ConnectReach
system.
Stop! End of Procedure.
363-208-050
Issue 4 June 2002 9-19