Software Upgrade, Maintenance, and Trouble Clearing
Trouble Clearing Procedures
Using the Self Test Results to Detect
Troubles (Continued)
Ethernet port LEDs
The Ethernet port has two built-in LEDs that are located on the 10BASE-T
connector (refer to the following figure for location), they are as follows:
The green "link integrity" LED. This LED lights when the link between the
3
SLC ConnectReach system and the Ethernet hub is functioning.
The yellow "activity" LED. This LED blinks when the SLC ConnectReach
3
system transmits or receives data to and from the Ethernet port.
363-208-050
Issue 4
June 2002
9-25