Lucent Technologies SLC ConnectReach User & Service Manual page 84

Preinstallation Planning
Configuration and Installation Process
SLC ConnectReach System Preconfiguration Worksheet (Contd)
12. Voice Mail
Note: Configuration
is required only if
the LCR feature is
enabled.
13. Names and
Passwords
14. DHCP Service
15. SNMP Service
HTTP (Web
16.
Browser) Port
:
Telnet Port
17. :
18. Route
Note: One default
and up to 30 static.
3-14 Issue 4 June 2002
4 Off
Enable:
Line group: (1...5)
Integration delay: (0...500...5000) ms
4 Off
Stutter tone:
4 Off
Periodic ring:
DTMF settings for direct prefix, ring no answer, busy no answer, forward all, unknown forward,
and message waiting indications.
4 Generic 4 BBS Telecom 4 Panasonic TD1232
Preset profile:
4 Toshiba DK280 4 Samsung DCS
User privilege: Name: _______________Password: ________________
Additional User Access Groups: 4 Voice
Carrier privilege: Name BBBBBBBBBBBBBBB Password BBBBBBBBBBBBBBBBBB
4 On
Enable:
First IP address in range: ____________________
Last IP address in range: ____________________
Private network: 4 On
Lease time: _______ (600...7200 seconds)
DNS server IP address: _________________ (192.168.0.1)
Domain name: ______________
4 On
Enable:
IP address of SNMP host: __________________ (0.0.0.0)
Enable messages: Cold start
Warm start
Link down
Link up
Login failures 4 On
T1 traps
4
2II
Enable:
4
2II
Enable:
Default: WAN, PVCn or Gateway IP Address: _______________
Static: Network IP Address:______________________
Netmask: _____________________
WAN, PVCn or Gateway IP Address: _______________
4 On
4 On
4 On
4 Data
4 Off
(192.168.0.2)
(192.168.0.254)
4 Off
4 Off
4 On 4 Off
4 On 4 Off
4 On 4 Off
4 On 4 Off
4 Off
4 ESs 4 SESs
4 PCVs 4 LESs
4
2Q
Port Number:_____________________________(default 80)
4
2Q
Port Number:_____________________________(default 23)
363-208-050
4 Physical 4 Utils
4 SEFs 4 UASs 4 CSSs
4 BESs 4 DMs 4 LCVs