Displaying Statistics For The Slc Connectreach System - Lucent Technologies SLC ConnectReach User & Service Manual

SLC ConnectReach System Monitoring
Using the Statistics Command to Display System
Elements Status
Displaying Statistics for the SLC
™
ConnectReach System
Entering the
ConnectReach
command
7-48
Issue 4 June 2002
®
The ConnectReach command is used to display a SLC ConnectReach system
status report.
At the statistics prompt, enter the ConnectReach command:
(statistics)> ConnectReach
A ConnectReach status report similar to the following example is displayed.
LAPD state: S2
Transport state: UP
Messages sent: 15876
Messages rec'd: 16264
Sanity timeouts: 4
Send failures: 0
Checksum errors: 0
GBits: 0x0
363-208-050