Lucent Technologies SLC ConnectReach User & Service Manual page 430

Software Upgrade, Maintenance, and Trouble Clearing
Maintenance Procedures
Using the Archive Command to Upload/
Download Configuration Settings
(Continued)
Downloading an
archived
configuration over
the network from an
FTP server
(continued)
Uploading the
current
configuration using
a modem
9-16 Issue 4 June 2002
Step Procedure
6 On the Main Menu, use the warm-restart command to reboot the
SLC ConnectReach system:
> warm-start
NOTE:
If the download configuration changes the beginning channel
number of any range in the DS0 Provisioning menu, you must use
the cold-start command to reboot the SLC ConnectReach
system.
Stop! End of Procedure.
Use the following procedure to upload and store the current configuration settings
on a remote computer:
NOTE:
The archived configuration will be stored in the file and location you specify
when you start a text capture.
Step Procedure
1 From the remote computer, start a terminal application and dial the
modem connected to the SLC ConnectReach system.
2 At the login prompt, enter your login name and password.
3 At the Main Menu prompt, enter the archive command.
> archive
363-208-050
(Continued on next page)