Lucent Technologies SLC ConnectReach User & Service Manual page 36

System Overview
® ™
SLC ConnectReach
Overview (Continued)
Network interfaces
1-6 Issue 4 June 2002
System Description
The SLC ConnectReach system can be ordered in both AC and DC versions of
systems that provide the T1/DSX-1 interface with the SLC-2000 HDT.
The following sections provide a brief description of this interface. Refer to
document 363-208-000, SLC-2000 Access System, Applications, Planning, and
Ordering Guide, for additional information on SLC ConnectReach interfaces.
T1/DSX-1 Interface
The following figure shows the basic configuration for connecting a SLC
ConnectReach system with the SLC-2000 HDT using a T1 carrier system. Each
T1 carrier line contains one DS1 signal. The interface with the T1 carrier is built in
to the SLC ConnectReach system.
At the SLC-2000 HDT, the T1 carrier system usually interfaces the DT Server in
the SLC-2000 MDS assembly through a DSX cross-connect. The HDT does not
contain a built-in T1 interface.
363-208-050
(Continued on next page)