Lucent Technologies SLC ConnectReach User & Service Manual page 401

Configure/Monitor and Upgrade Software for the SLC
ConnectReach System Using a Web Browser
Executing Commands from the Main Menu
Displaying Selected Menu Screens
(Continued)
Display hardware
configuration
Display logs of
events and errors
The following procedure is used to display the hardware configuration screen:
Step Procedure
In the 6/& &RQQHFW5Hach system Main Menu, click
1
show-hardware-config command. The show-hardware-config
screen appears. An example of the show-hardware-config screen is
shown in the following figure.
2 To return to the Main Menu, click the Main Menu command at the bottom
of the show-hardware-config screen.
Stop! End of Procedure.
The SLC ConnectReach system keeps logs of various kinds of events and errors.
The following procedures describe how to access, clear, start, stop, and view the
status of the logs. For more information about interpreting the logs, refer to
Chapter 9, "Software Upgrade, Maintenance, and Trouble Clearing".
363-208-050
(Continued on next page)
8-13
Issue 4 June 2002