Lucent Technologies SLC ConnectReach User & Service Manual page 407

Configure/Monitor and Upgrade Software for the SLC
ConnectReach System Using a Web Browser
Executing Commands from the Main Menu
Using a Web Browser to Upgrade
Software (Continued)
Displaying and
using the network-
upgrade screen
(continued)
Step Procedure
6 In the Main Menu screen, click the network-upgrade command. The
network upgrade screen appears again. Note that at the bottom of the
screen, new instructions are displayed, as shown in the following figure.
7 The following table describes the parameters used for a network
upgrade. To download from Lucent Technologies' FTP site directly to the
SLC ConnectReach system, set the version parameter to the version you
want to download and enter the password to your e-mail address. The
remainder of the parameters are preset for Lucent Technologies' FTP
site.
Next to this option
server-ipaddr
version
user
password
host-download-
directory
Specify this information
IP address of the file transfer protocol (FTP) server on which
the software is located.
Version string of the software you want to download.
Name for logging on to the FTP server.
Password for logging on to the FTP server, this is your email
address.
Directory on the FTP server in which the new software is
located.
Issue 4
363-208-050
(Continued on next page)
8-19
June 2002