Lucent Technologies SLC ConnectReach User & Service Manual page 441

Software Upgrade, Maintenance, and Trouble Clearing
Trouble Clearing Procedures
Displaying a Time-Stamped Log of
Events (Continued)
Entering the log
command
(continued)
NOTE:
Log eventdump 10 shows the first ten events in the log. Log eventdump -10
shows the last ten events in the log. The log status is also displayed. The
reset counters include Reset Status Register (RDR), cookie and endCookie
(which count the number of times that the log is discarded due to problems
at the beginning or end), death (which counts restarts due to suspended
tasks), taskDie (which counts restarts due to running out of memory), and
watchDog (which is currently unused, but which can be used to count
restarts due to hung tasks).
The following is an example of the display obtained when the log command is
entered.
> log eventdump
0/00:00:00.000000000 httpd
0/00:00:00.000000030 ?083fd66c maxMemRecs 500 maxEventRecs 500
0/00:03:04.000011056 httpd 207.104.144.199 started HTML
session
Log: max 500 cur 3. log is running
> log status
Log status:
memMax 500,cur 327 eventMax 500,cur 6 t1Max 500,cur 2
inFilter mask 0x00000000 level 0, outFilter mask 0x00000000
level 0
log is running
Reset counters:
RSR 002 cookie 1 endCookie 0
death 0 taskDie 0 watchDog 0
363-208-050
Issue 4 June 2002 9-27