Lucent Technologies SLC ConnectReach User & Service Manual page 78

Access system
Table of Contents

Advertisement

Preinstallation Planning
Configuration and Installation Process
General
1. Where will the SLC ConnectReach system be placed? (circle one)
(A rack mount kit for ANSI-type frames and a wall mount kit is included with all units, rubber feet are included for
desktop placement.) If rack mounted, allow 1.75" above unit for cooling. Wood screws for wall mounting are not
included.
2. What is the distance from the Network T1/DSX-1 Demarc? (Connector type RJ48C) ____________________
(A 10 foot cable is included with each SLC ConnectReach system, a custom cable is required if the distance is
greater than 10 feet.)
3. If AC powered, is the power receptacle within six feet of where the unit will be located?
Power requirement: 120 V AC at 1 Amp
4. If DC powered, a DC power cable is included.
Network T1 RJ48C
5. Framing ordered (required for systems prior to R3.6.3)
Coordinate with the PBX vendor to be on-site for the installation of the SLC ConnectReach system in case any
changes need to be made to the routing parameters, etc.
Analog Voice
6. What is the distance between the SLC ConnectReach system and the PBX/KTS or patch panel? __________
Analog channels are available on a standard female RJ21X 25 pair connector (order the appropriate cable length).
Secondary/Fractional T1/DSX-1 RJ48C (Optional)
7. What is the distance between the SLC ConnectReach system and the PBX/KTS or patch panel? __________
Pinouts are the same as the Network T1/DSX-1, a rollover/crossover cable is required to connect to the PBX or
KTS. The cable pin outs are shown in Chapter 5, "Installation".
Line coding ordered (circle one)
Framing ordered (circle one)
Line Buildout (circle one)
Ethernet 10BaseT
8. What is the distance between the SLC ConnectReach system and the 10BaseT hub? ___________________
(Order or make appropriate cable length)
3-8
Issue 4
June 2002
SLC ConnectReach System Preinstallation Worksheet
DSX-1
0-133 ft.
DS1
0 db
–7.5 dB
RACK (19" 23")
ESF
B8ZS
AMI
ESF
D4 (SF)
133-266 ft.
266-399 ft.
– 15 dB
–22 dB
WALL
DESKTOP
Y
N
399-533 ft.
533-655 ft.
363-208-050

Advertisement

Table of Contents
loading

Table of Contents