Lucent Technologies SLC ConnectReach User & Service Manual page 40

System Overview
® ™
SLC ConnectReach
Overview (Continued)
Benefits (continued)
Features
1-10 Issue 4 June 2002
System Description
Comprehensive Operation, Administration, Maintenance and Provisioning
(OAM&P) Capabilities
User access to the SLC ConnectReach OAM&P interface can be established
using any of the following methods:
Telnet session
3
A hypertext transfer protocol (HTTP) web browser through the Internet
3
(requires a configuration using a software upgrade package SW-B or
higher)
A terminal directly connected to a local RS-232 console port
3
A remote terminal through a modem connected to the RS-232 console port
3
A craft interface terminal (CIT) connected to a SLC-2000 Access System
3
RT/HDT.
The system supports simple network management protocol (SNMP) and provides
statistics reports and logs of events and DSX-1 network interface status.
You can provision the SLC -2000 HDT locally or remotely from the HDT's CIT port
located on the front of the user interface panel (UIP) or on the rear of the HDT,
respectively.
Some of the features provided by the SLC ConnectReach system include:
Public switched telephone network (PSTN) telephony service. Emulates up
3
to six quad channel units at a time (24 voice circuits). Four versions of
interface cards are available: four- and eight-line current feed (CF) and
four- and eight-line current sink (CS).
Wide area network (WAN) to local area network (LAN) router (frame relay
3
to Ethernet).
363-208-050
(Continued on next page)