Lucent Technologies SLC ConnectReach User & Service Manual page 83

Preinstallation Planning
Configuration and Installation Process
SLC ConnectReach System Preconfiguration Worksheet (Contd)
8. Analog Trunk
Note: Configuration
is required only if
the LCR feature is
enabled.
9. Line
Note: Configuration
is required only if
the LCR feature is
enabled.
10. Map Extensions
11. Dialing
(See "Configuring
Dialing" on
page 4-89)
Range: Begin _____ (1...24)
Beginning and ending of configuration blocks.*
Group: ______ (1...2...5)
4 Loop start
Signaling:
4 In
Direction:
Incoming routing: 4 Group
4 1 4 Line or line group# _______
Line group:
4 DTMF
Digit type:
Busy treatment: 4 Busy signal
Busy forward line: Line # ______ (1...24)
4 0 dB
Transmit gain:
4 0 dB
Receive gain:
Range: Begin _____ (1...24)
Beginning and ending of configuration blocks.*
Group: ______ (1...5)
4 Loop start
Signaling:
4 In
Direction:
Outgoing routing: 4 LCR
4 1 4 Trunk group # _______
Trunk group:
On-hook threshold: ________
4 Disable
Far end
disconnect:
Polarity reversal: 4 Disable
4 Double
Trunk ring
default:
Paging line: 0 (valid line)
4 Linear
Hunting:
Business OfficeXchange features
Extension Digits: (1...2...10)
Extension Assignment:
Pattern of Detected Digits: Digits
Action on Detected Digits:
Primary and Alternate Trunk Groups:________________________
Trunk Access Code or Local Digits:_________________________
DID Received Digits:_____________________(1...2...12)
Pause:_____________(100...2000....20000 msec)
End _____ (1...24)
4 Ground start
4 Out
4 Line
4 Pulse
4 Busy out
4 –3 dB 4 –6 dB
4 –3 dB 4 –6 dB 4 –12 dB
End _____ (1...24)
4 Ground start
4 2-way
4 Group
(300...1250...2000 msec)
4 Enable
4 Enable
4 Single
4 Most idle
(Refer to "BOX features description" on page 4-80, for
more information)
Range Any Digit (X)
1...12, D, P) (see the Detect-Insert example on page
"Configuring Dialing (Continued)" on page 4-90).
4 Unconfigured
4 2-way
4 Forward
4 Unconfigured
Local (L) Timeout(T)
Issue 4 June 2002
363-208-050
3-13