Lucent Technologies SLC ConnectReach User & Service Manual page 419

Software Upgrade, Maintenance, and Trouble Clearing
Maintenance Procedures
Upgrading the SLC
System with New Software (Continued)
Software upgrade
from a local
computer
(continued)
Software upgrade
from a remote
computer
®
ConnectReach
8 After the transfer completes, the following message will appear on the
screen and the system will reboot:
Transfer complete.... Saving image
9 After the system has rebooted, verify that the system is running the new
software. Check the version number using the version command at the
Main Menu prompt or by viewing the version number that appears on the
screen after rebooting.
SLC ConnectReach System (x.xx)
Where x.xx is the software version.
Stop! End of Procedure.
The steps to upgrade the SLC ConnectReach system software using a remote
computer and a modem connected to the RS-232 port are contained in the
following procedure:
Step Procedure
1 From the remote computer, start a terminal application and dial the
modem connected to the SLC ConnectReach system.
2 At the login prompt, enter your login name and password.
3 At the Main menu prompt, enter the network-upgrade command:
> network-upgrade
4 At the network-upgrade prompt, enter the prepare command.
(Network-upgrade)> prepare
™
363-208-050
(Continued on next page)
Issue 4 June 2002 9-5