How To Use This Information Product - Lucent Technologies SLC ConnectReach User & Service Manual

About This Information Product (IP)

How to Use This Information Product

How to Use This Information Product
Organization
Introduction
"About This
Information Product"
Chapter 1, "System
Overview"
Chapter 2, "Product
Description"
Chapter 3,
"Preinstallation
Planning"
Chapter 4,
"Configuring the SLC
ConnectReach
System"
Chapter 5,
"Installation"
This information product (IP) is organized in the given order.
This section defines the purpose, scope, and intended audience for this IP;
provides introductory and support information on this IP; includes the
bibliography (references); lists training courses; and lists information on how to
obtain technical support.
This chapter describes a high-level overview of the SLC ConnectReach system
and its architecture.
This chapter provides a physical and functional description of the SLC
ConnectReach system. This chapter also includes a description of the peripheral
equipment that can be used with the SLC ConnectReach system.
This chapter includes instructions for completing preconfiguration and
preinstallation worksheets that can be used to reduce the time it takes to
configure and install a SLC ConnectReach system.
This chapter contains procedures for configuring the SLC ConnectReach system
according to the settings selected on the preconfiguration worksheets. These
procedures assume that the SLC ConnectReach system is to be configured at a
staging area prior to installation at a customer site. Procedures are also included
for reconfiguring the SLC ConnectReach system from a remote location after it
has been installed.
This chapter provides the procedures for mounting and connecting cables to the
SLC ConnectReach system. The procedures for installing interface cards into
the SLC ConnectReach system and connecting two ConnectReach systems
together to obtain more than 24 voice channels are also included in this chapter.
363-208-050
(Continued on next page)
Issue 4 June 2002 xi