Lucent Technologies SLC ConnectReach User & Service Manual page 219

®
Configuring the SLC ConnectReach
Using the Configuration Commands
Configuring the Default Firewall
(Continued)
Viewing default
firewall
configuration
settings
™
System
To view the IP inbound filter group settings, enter:
(config:IPFirewall)>
and type a '?'
The IP inbound filter group settings for the default IP filter sample configuration
shown in the preceding figure are as follows:
1Filter: permit
2Filter: permit
3Filter: permit
4Filter:
5Filter:
6Filter:
7Filter:
8Filter:
9Filter:
10Filter:
11Filter:
12Filter:
13Filter:
14Filter:
15Filter:
16Filter:
defaultAction denyAll
NOTE:
TCP/UDP ports: 0-1023 are reserved; 1024 and above are unreserved.
inipfiltergroup
tcpport > 1023
udpport > 1023
ping
(Continued on next page)
Issue 4 June 2002 4-133
363-208-050