Lucent Technologies SLC ConnectReach User & Service Manual page 362

SLC ConnectReach System Monitoring
Using the Statistics Command to Display System
Elements Status
Displaying Statistics for a T1 Interface
(Continued)
Displaying usage
report (continued)
7-28
Issue 4 June 2002
A report similar to the following example is displayed.
T1 usage samples during previous 4 hours:
data transmit
min
15 min ago: 0%
30 min ago: 0%
45 min ago: 0%
60 min ago: 0%
75 min ago: 0%
90 min ago: 0%
105 min ago: 0%
120 min ago: 0%
135 min ago: 0%
150 min ago: 0%
165 min ago: 0%
180 min ago: 0%
195 min ago: 0%
210 min ago: 0%
225 min ago: 0%
240 min ago: 0%
The Usage Report data is displayed in 15 minute increments. Voice DS0s are
sampled once every minute with the minimum, maximum, and average minutes
displayed. Data DS0s are monitored by counting the total number of bytes sent
during a 1-minute interval.
The Usage Report is an indicator of efficient DS0 assignment. If the following
example were the case for an extended period of time, reallocating the DS0s
would improve the overall use of the T1 line:
— 16 voice DS0s showing a maximum minute of 10 percent
— Eight data DS0s showing an average minute of 90 percent.
data receive
avg max | min avg
0% 12% | 0% 3%
1% 30% | 0% 6%
1% 18% | 0% 6%
1% 24% | 0% 16%
1% 12% | 0% 16%
0% 9% | 0% 3%
0% 10% | 0% 1%
1% 25% | 0% 2%
1% 60% | 0% 1%
0% 10% | 0% 0%
0% 8% | 0% 0%
0% 5% | 0% 0%
0% 5% | 0% 0%
0% 15% | 0% 0%
0% 1% | 0% 0%
0% 1% | 0% 0%
363-208-050
voice
max | min avg max
74% | 0% 1% 7%
99% | 0% 6% 7%
77% | 0% 5% 14%
100% | 0% 2% 7%
100% | 0% 0% 0%
97% | 0% 4% 7%
47% | 0% 1% 7%
92% | 0% 0% 7%
64% | 0% 1% 7%
38% | 0% 0% 0%
11% | 0% 0% 0%
4% | 0% 0% 0%
11% | 0% 0% 0%
10% | 0% 0% 0%
11% | 0% 0% 0%
2% | 0% 0% 0%