Lucent Technologies SLC ConnectReach User & Service Manual page 339

SLC ConnectReach System Monitoring
Using the Statistics Command to Display System
Elements Status
Entering the Statistics Mode (Continued)
Entering the
statistics command
Entering the
statistics command
options
To display statistics for the SLC ConnectReach system, you must first switch to
the statistics mode by entering the statistics command at the Main Menu
prompt (> statistics ).
The prompt changes to the statistics prompt [ (statistics) > ] where you can
enter statistics command options.
Use the following procedure to enter the desired statistics command option(s):
1. At the statistics prompt [ (statistics) > ], enter the appropriate statistics
command option from the following table.
2. When you are done, enter the Exit command to return to the Main Menu.
363-208-050
(Continued on next page)
7-5
Issue 4 June 2002