Optional Circuit Card Installation - Lucent Technologies SLC ConnectReach User & Service Manual

Installation
Interface Card Installation

Optional Circuit Card Installation

Introduction
The SLC ConnectReach system can contain one of the three following optional
circuit cards to enable specific features and services:
Fractional T1 circuit card
3
Telco digital signal processor (DSP) circuit card
3
Fractional T1/DSP combination circuit card.
3
The installation for these cards is divided into two procedures. One procedure
covers the installation of the fractional T1 circuit card and the second procedure
covers the installation of the DSP circuit card or the fractional T1/DSP
combination circuit card.
363-208-050
(Continued on next page)
Issue 4 June 2002 5-13