Displaying Statistics For Interfaces - Lucent Technologies SLC ConnectReach User & Service Manual

SLC ConnectReach System Monitoring
Using the Statistics Command to Display System
Elements Status

Displaying Statistics for Interfaces

Entering the
interfaces command
Example of
interfaces statistics
report
The interfaces display tells you the status and configured parameters of the
network interfaces on the Multiservice Xchange.
To display the statistics for interfaces, enter the interfaces command at the
statistics prompt. For example:
(statistics)> interfaces
The following is an example of an interfaces statistics report that will be displayed
on the PC monitor screen.
cpm0 (unit number 0):
Flags: (0x63) UP BROADCAST ARP RUNNING
Internet address: 207.104.144.180
Broadcast address: 207.104.144.255
Netmask 0xffffff00 Subnetmask 0xffffff00
Ethernet address is 00:60:49:f0:00:05
Metric is 0
Maximum Transfer Unit size is 1500
85999 packets received; 1480 packets sent
0 input errors; 1480 output errors
0 collisions
lo (unit number 0):
Flags: (0x69) UP LOOPBACK ARP RUNNING
Internet address: 127.0.0.1
Netmask 0xff000000 Subnetmask 0xff000000
Metric is 0
Maximum Transfer Unit size is 4096
0 packets received; 0 packets sent
0 input errors; 0 output errors
0 collisions
363-208-050
(Continued on next page)
7-15
Issue 4 June 2002