Preparing For The Installation; Selecting An Installation Site; Before You Begin - Lucent Technologies Stinger MRT 19 Getting Started Manual

Preparing for the Installation

Selecting an installation site . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

Before you begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

Required tools and equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
Preventing static discharge damage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
Unpacking the Stinger MRT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4
Verifying the hardware configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4
Selecting an installation site
Before you choose a setup location for a Stinger MRT unit, read and follow the site
and electrical requirements defined in the Edge Access and Broadband Access Safety and
Compliance Guide.
Select the setup location carefully. Keep in mind that the unit requires proper
ventilation and space for current and future cabling requirements.
Caution
! chassis to ensure sufficient air flow. The Stinger MRT 23 and Stinger MRT 19 pull air
in from the right side of the chassis and exhaust air from the left side of the chassis.
A Stinger MRT can be mounted in a number of ways, depending on the space that is
available. You can rack-mount the Stinger MRT 23 chassis horizontally in an
equipment rack or outdoor cabinet with mounting rails that are 23 inches (58.42cm)
apart. You can rack-mount the Stinger MRT 19 chassis in an equipment rack or
outdoor cabinet with mounting rails that are 17.72 inches (45.0cm) apart. Optional
mounting hardware is also available for mounting the Stinger MRT 23 chassis
vertically between mounting rails spaced 19 inches (48.26cm) apart, and for wall
mounting both Stinger models. For more information, contact your Lucent
Technologies sales representative.
Before you begin
Warning
instructions in the Edge Access and Broadband Access Safety and Compliance Guide. Also
read Appendix D, "Safety-Related Electrical, Physical, and Environmental
Information," in this guide for information specific to your product.
Stinger® MRT Getting Started Guide
At least 1 inch (2.5cm) of clear space must remain on both sides of the MRT
Before installing your Stinger MRT unit, be sure to read the safety
2
2-1
2-1
2-2
2-2
2-4
2-4
19
2-1