Table of Contents
Advertisement
About This Guide
What is in this guide
This guide explains how to perform the following installation and basic configuration
tasks on a Stinger MRT (Micro-Remote Terminal) unit:
Physical installation of a Stinger MRT unit
Connection of an administrative terminal to a Stinger MRT
Configuration of a Stinger MRT for basic network connectivity
This guide also provides Stinger MRT technical specifications and an operational
overview of the Stinger MRT. When you finish performing the instructions in this
guide, your Stinger MRT will be installed and you will be able to access it via a Telnet
connection for further configuration.
What you should know
Warning
instructions in the Edge Access and Broadband Access Safety and Compliance Guide. For
information specific to your unit, see Appendix D, "Safety-Related Electrical,
Physical, and Environmental Information," in this guide.
The procedures in this guide require you to understand and follow the safety
practices at your site, as well as those identified in this guide. Before installing any
hardware, check the installation location for adequate temperature, humidity, and
electrical requirements. Work closely with the network manager and other systems
integration personnel to ensure a functional installation.
Documentation conventions
Following are all the special characters and typographical conventions used in this
manual:
Convention
Monospace text
Boldface
monospace text
Stinger® MRT Getting Started Guide
Before installing your Stinger MRT unit, be sure to read the safety
Meaning
Represents text that appears on your computer's screen, or that
could appear on your computer's screen.
Represents characters that you enter exactly as shown (unless
the characters are also in italics—see Italics, below). If you
could enter the characters but are not specifically instructed to,
they do not appear in boldface.
xvii
Advertisement
Table of Contents
