0B-7 Maintenance and Lubrication:
Fuel Tank Inspection
Check fuel tank damage, cracks, fuel leakage, corrosion
and tank bolts looseness.
If a problem is found, repair or replace.
PCV Valve Inspection
Check crankcase ventilation hose and PCV hose for
leaks, cracks or clog, and PCV valve for stick or clog.
Refer to "PCV Valve Inspection in Section 1B" for PCV
valve checking procedure.
Fuel Evaporative Emission Control System
1) Visually inspect hoses for cracks, damage, or
excessive bends. Inspect all clamps for damage and
2) Check EVAP canister for operation and clog,
referring to "EVAP Canister Inspection in Section
If a malfunction is found, repair or replace.
Brake Discs and Pads (Front) Inspection
1) Remove wheel and caliper but don't disconnect
brake hose from caliper.
2) Check front disc brake pads and discs for excessive
wear, damage and deflection. Replace parts as
necessary. For details, refer to "Front Disc Brake
Pad Inspection in Section 4B" and "Front Brake Disc
Inspection in Section 4B".
Be sure to torque caliper pin bolts to specification.
Brake Drums and Shoes (Rear) Inspection
1) Remove wheel and brake drum.
2) Check rear brake drums and brake linings for
excessive wear and damage, while wheels and
drums are removed. At the same time, check wheel
cylinders for leaks. Replace these parts as
For details, refer to "Rear Brake Drum and Shoe
Inspection in Section 4C".