Fuel Pump Inspection; Main Fuel Level Gauge Removal And Installation; Main Fuel Level Gauge Inspection; Sub Fuel Level Gauge Removal And Installation - Suzuki GRAND VITARA 2005 Service Manual

1G-27 Fuel System:

Fuel Pump Inspection

• Check fuel pump assembly for damage.
• Check fuel suction filter for evidence of dirt and
contamination.
If present, replace or clean and check for presence of
dirt in fuel tank.
• For electrical circuit.

Main Fuel Level Gauge Removal and Installation

CAUTION
!
• Do not touch resister plate (1) and deform
arm (2). It may cause main fuel level gauge
to fail.
• Be very careful not to cause damage to
fuel tube installed section (sealed section
in bore). If it be damaged, replace it with
new one, or fuel will leak from the part.
Removal
1) Remove fuel pump assembly from fuel tank referring
to "Fuel Pump Assembly Removal and Installation: ".
2) Disconnect main fuel level gauge connector (3).
3) With pressing snap-fit part (2), remove main fuel
level gauge (1) by sliding it in the arrow direction as
shown in figure.
3
1
Installation
Reverse removal procedure for installation.
S5JB0B1706043
S5JB0B1706039
2
1
I5JB0B170036-01
2
1
I5JB0B170037-01

Main Fuel Level Gauge Inspection

• Check main fuel level gauge for damage.
• For inspection of main fuel level gauge (1), refer to
"Fuel Level Sensor Inspection: in Section 9C".
1

Sub Fuel Level Gauge Removal and Installation

CAUTION
!
Do not touch resister plate (1) and deform
arm (2). It may cause sub fuel level gauge to
fail.
Removal
1) Remove fuel tank from vehicle Referring to "Fuel
Tank Removal and Installation: "
2) Disconnect sub fuel level gauge connector (1)
referring to "Fuel Hose Disconnecting and
Reconnecting: ".
3) Remove sub fuel level gauge (2).
S5JB0B1706041
I5JB0A171027-01
S5JB0B1706040
1
2
I5JB0A171028-01
1
2
2
I5JB0A171029-01