Fuel Tank Inlet Valve Inspection; Fuel Pump On-Vehicle Inspection; Fuel Pump Assembly Components - Suzuki Liana RH413 Service Manual

1G-14 Fuel System:

Fuel Tank Inlet Valve Inspection

WARNING
!
Before servicing fuel system, be sure to
observe "Precautions on Fuel System
Service".
Check fuel tank inlet valve for the following.
If any damage or malfunction is found, replace.
• Damage
• Smooth opening and closing

Fuel Pump On-Vehicle Inspection

WARNING
!
Before servicing fuel system, be sure to
observe "Precautions on Fuel System
Service".
1) Remove filler cap and turn ignition switch (2) ON.
Then fuel pump operating sound should be heard
from fuel filler (1) for about 2 seconds and stop. Be
sure to install fuel fill cap after checking.
If the check result is not satisfactory, advance to
"Fuel Pump and Its Circuit Check in Section 1A".
2) Turn ignition switch OFF, and wait for 10 minutes or
S3RH0A1706013 more.
3) Fuel pressure should be felt at fuel feed hose (1) for
about 2 seconds after ignition switch ON.
If fuel pressure is not felt, advance to "Fuel Pressure
Check in Section 1A".

Fuel Pump Assembly Components

I2RH0B170019-01
S3RH0A1706021
1. Fuel filter assembly (including check valve)
IVSY01170013-01
2. Grommet
3. Tube
4. Housing
5. O-ring
6. Fuel level sensor (Fuel sender gauge)
7. Fuel pump
I2RH0B170025-01
S3RH0A1706022
I3RH0A170002-01
8. Cushion
9. Bracket
10. Gasket
11. Fuel pump plate
: Do not reuse.
Apply oil.
: