Clear Arp - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

clear arp

Syntax
Release Information
Description
Options
Mode
358
clear [ ip ] arp [ vrf vrfName ] { ipAddress interfaceType interfaceSpecifier | * }
Command introduced before JunosE Release 7.1.0.
Clears entries from the ARP cache. There is no no version.
vrfName—Name of the VRF; string of 1–32 alphanumeric characters
ipAddress—IP address in 32-bit dotted-decimal format of the entry to be cleared
interfaceType—Interface type; see "Interface Types and Specifiers" on page 5
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
*—Clears all dynamic ARP entries
Privileged Exec
Copyright © 2010, Juniper Networks, Inc.