Class-Vc - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

class-vc

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
class-vc vcClassName
no class-vc [ vcClassName ]
Command introduced in JunosE Release 7.3.0.
Assigns a previously configured VC class to an individual ATM data PVC. The class-vc
command is valid only for data PVCs created with the pvc command; it has no effect for
data PVCs created with the atm pvc command, or for control (ILMI or signaling) PVCs.
Issuing this command applies the set of attributes in the specified VC class to the ATM
data PVC. The no version removes the VC class association with the ATM PVC.
vcClassName—Name of the VC class configured with the vc-class atm command
ATM VC Configuration
Chapter 4: C Commands
355