Status Logins - Avaya S8700 Maintenance Manual

Maintenance Commands

status logins

status logins [print]
This command will display information about all of the users that are currently
logged into the system. This information will contain their login names, location of
physical access, and their currently executing command.
The screen does not automatically update, and is a reflection of the system at the
time the request was made. Users may have logged off, or on, or the command
may have finished executing while the information is being displayed. These
updates will not be reflected until the next execution of the command.
The command will take a snapshot of the commands that the users on the system
are currently executing. Because of timing, the command could be terminated by
the time this command finishes displaying the list (that is, the active command
may not be accurate).
The following is an example of the results of the status logins command:
status logins
Login Type Location
*init SYS-PORT TELNET
Command successfully completed
7-364 Issue 1 May 2002
USER LOGIN INFORMATION
Aux Active Command
135.9.38.18 stat logins
ID
2
555-233-143