Status Ip-Board - Avaya S8700 Maintenance Manual

Maintenance Commands

status ip-board

status ip-board CCcss
The status ip-board command runs on R10 or later systems. The command has
the same syntax and output as the status c-lan-ip command except the list of
allowed boards is larger. The command can be run on either a TN799 or a
TN2302.
NOTE:
This SAT command cannot be run on the MAPD board.
The command status ip-board CCcss returns the data in the first two columns of
the following table. The form also shows the time of the last port reset, the last
hour start time and end time for the error counter statistics.
Table 7-51. status c-lan-ip CCcss
Field Name
on switch
output Output type
Incoming Counter
datagram
header errors
Outgoing Counter
datagrams
with no route
available
Incoming Counter
datagrams
received
7-352 Issue 1 May 2002
MIB data
Long ipInHdrErrors
Long ipOutNoRoutes
Long ipInReceives
Description
The number of input datagrams
discarded due to errors in their IP
headers, including bad checksums,
version number mismatch, other
format errors, time-to-live exceeded,
errors discovered in processing their
IP options, and so on.
The number of IP datagrams
discarded because no route could be
found to transmit them to their
destination. Note that this counter
includes any packets counted in
ipForwDatagrams which meet this
`no-route' criterion. Note that this
includes any datagrams which a host
cannot route because all of its default
gateways are down.
The total number of input datagrams
received from interfaces, including
those received in error.
Continued on next page
555-233-143