Avaya S8700 Maintenance Manual page 650

Maintenance Commands
Field Descriptions
A line of information is displayed for each switch node carrier.
The switch node number, 1 or 2. If the PNC is duplicated, the A and B PNCs are
Switch Node
each reported separately.
The physical position of the switch node carrier represented as "UUc" (where
Location
"UU" represents the cabinet number and "c" represents the carrier).
A high-reliability system will display only one switch node location.
A critical-reliability system will display the active and standby switch node
locations.
The mode is the current role of the switch node carrier. A mode of "active" means
Mode
the SN is providing normal circuit and control functions for PNC. A mode of
"standby" means the SN is ready to become active, but is currently not active. If
blanks are displayed it means that PNC is not duplicated.
The number of major alarms logged against the switch node carrier that is being
Major
displayed.
Alarms
The number of minor alarms logged against the switch node carrier that is being
Minor
displayed.
Alarms
The number of warning alarms logged against the switch node carrier that is
Warning
being displayed.
Alarms
The physical position of the active switch node Clock circuit pack, per
Active SNC
administration, represented as "UUcSS."
Location
"UU" represents the cabinet number
c" represents the carrier
"SS" represents the slot position.
If an SNC is administered but not inserted, "no board" will be displayed.
The physical position of the standby switch node Clock circuit pack, per
Standby SNC
administration, represented as "UUcSS."
Location
"UU" represents the cabinet number
"c" represents the carrier
"SS" represents the slot position.
Blanks will be displayed if there is no standby switch node Clock for a given
switch node. If an SNC is administered but not inserted, "no board" will be
displayed.
7-394 Issue 1 May 2002 555-233-143