Avaya S8700 Maintenance Manual page 618

Maintenance Commands
Outgoing
Transmitted
unicast
packets
Outgoing
multicast
packets
Outgoing
transmitted
octets
Outgoing
errored
packets
Outgoing
packets
discarded
Processor Channel Status Form (Page 3)
The example below is for processor channels (page 3 of the form). Information
about administered hop channels displays on page 4 of the form.
The processor or hop channel status information can take either 1 or 2 pages on
this form, depending on the number of links being reported and their condition.
status link 1
UP: 001,004
Field Descriptions (Page 3)
NOTE:
A dash (–) or a colon (:) between numbers indicates all numbers including
and between the indicated numbers.
Channels are up.
UP:
Channels are down.
DN:
Channels are in a pending state from the down to the up state (processor channels only)
PND:
7-362 Issue 1 May 2002
The total number of packets that higher-level protocols requested be
transmitted to a subnetwork-unicast address, including those that were
discarded or not sent.
The total number of packets that higher-level protocols requested be
transmitted to a non- unicast (subnetwork-broadcast or
subnetwork-multicast) address, including those that were discarded or not
sent.
The total number of octets transmitted out of the interface, including
framing characters.
The number of outbound packets that could not be transmitted because of
errors.
The number of outbound packets which were chosen to be discarded even
though no errors had been detected to prevent their being transmitted.
One possible reason for discarding such a packet could be to free up buffer
space.
PROCESSOR CHANNEL STATUS
Page 3 of 4
555-233-143