Avaya S8700 Maintenance Manual page 656

For multi-connect configurations
Hide thumbs Also See for S8700:
Table of Contents

Advertisement

Maintenance Commands
Output
Trunk
Group/Member
Port
Signaling
Group ID
Connected
Ports
Service State
Maintenance
Busy
CA-TSC State
Audio
Connection
Type
Audio Switch
Port
7-400
Issue 1 May 2002
Group and member numbers of specified trunks.
The location of the port associated with the trunk.
For ISDN trunks, the number of the signaling group to which the trunk
group belongs. For other trunk types, the field is blank.
Locations of ports currently connected to the trunk.
One of the following states is displayed: in-service/active, in-service/idle,
out-of-service, out-of-service-NE (Near End), out-of-service-FE (Far End),
maint-NE/active, maint-FE/active, maint-NE/idle, maint-FE/idle,
pending-in-service, pending-maint, or disconnected. NE (Near End) and
FE (Far End) refer to which end of the trunk has placed the facility in its
current state. Explanations of these service states for each type of trunk
appear in the maintenance object descriptions in
''Maintenance-Object Repair
Whether maintenance testing is currently being performed upon the trunk.
The status of the call-associated temporary signaling connection, if any. A
TSC is a temporary connection set up to pass call information over
ISDN-PRI signaling links.
Shows ip-tdm, ip hairpin, ip direct, or ip idle.
Shows a virtual port number (i.e., one starting with T). If a trunk is in ip-idle
state, the
Audio Switch Port
Chapter 8,
Procedures''.
field shows blank.
555-233-143

Advertisement

Table of Contents
loading

Table of Contents