Avaya S8700 Maintenance Manual page 644

Maintenance Commands
Field Descriptions (Page 3)
IP Signaling:
Switch Port
IP Signaling:
Switch-end IP
Addr and Port
IP Signaling:
Set-end IP Addr
and Port
H.245: Switch
Port
H.245:
Switch-end IP
Addr and Port
H.245:
Set-end IP Addr
and Port
Node Name (for
Call Control)
Network Region
(for Call
Control)
xxxxxxx Audio
Audio: Port
Audio:
Other-end IP
Addr and Port
7-388 Issue 1 May 2002
The C-LAN board location serving the switch end of the IP signaling link.
The port number is always 17 for the "ethernet" port of the C-LAN. This field
will be blank for an unregistered H.323 station.
Switch-end Q.931 (H.323 station) or CCMS (IP SoftPhone) IP signaling
address and IP port. IP address is of the form xxx.xxx.xxx.xxx where xxx
have decimal values 0-255. IP Port has a decimal value 0-65535.
field will be blank for an unregistered H.323 station.
Set-end Q.931 IP signaling address and IP port. IP address is of the form
xxx.xxx.xxx.xxx where xxx have decimal values 0-255. IP port is a decimal
value 0-65535. This field will be blank for an unregistered H.323 station.
The C-LAN port serving the H.245 signaling link. The port number is always
17 for the "ethernet" port. This field is blank for an unregistered H.323
station, a VPhone, or when H.245 tunneling in Q.931 is used.
Switch-end H.245 IP signaling address and TCP/IP port. IP address is of
the form xxx.xxx.xxx.xxx where xxx is 0-255. IP Port is 0-65535. This field
is blank for IP SoftPhone endpoints and those endpoints using Q.931
tunneling of H.245. This field will be blank for an unregistered or inactive
H.323 station.
Set-end H.245 IP signaling address and IP Port. IP Address is of the form
xxx.xxx.xxx.xxx where xxx have decimal values 0-255. IP Port is 0-65535.
This field is blank for IP SoftPhone endpoints and those endpoints using
Q.931 tunneling of H.245. This field will be blank for an unregistered or
inactive H.323 station.
Label administered for an IP address.
A number given to a set of IP addresses to indicate they have a common
set of characteristics.
The type of audio active for the station. The xxxxxxxx preceding Audio can
have one of these values: G.711-MU, G711-A, G.729A, G.723.1-6.3,
G.723.1-5.3, PCM, 711-MU, 711-A, 729, 729A, 729B, 729-AB, or
723.1-5.3/6.3. If the station is a telecommuter IP SoftPhone configuration
with call-back audio, xxxxxxxx will be set to PCM. If no audio path is
present, the xxxxxxxx field will be blank.
The physical port used to provide audio path for the endpoint. The port
represents a MedPro port for H.323 stations, or for stations using a H.323
endpoint for audio. The field will be blank for stations with no established
audio path, or for telecommuter stations. In particular, an idle IP SoftPhone
or H.323 station with an as-needed service link will show no audio port.
Other-end IP audio address and IP port. IP address is of the form
xxx.xxx.xxx.xxx where xxx have decimal values 0-255. Port is a decimal
value 0-65535. This field will be blank for an idle station with no audio link,
or for a telecommuter IP SoftPhone with circuit-switched audio link.
This
555-233-143