Renault Laguna III Manual page 2202

Complete rear axle system: Removal - Refitting
2-WHEEL STEERING
a Unscrew the brake pipe unions (7) on the callipers.
a Remove:
- the bolts (8) securing the "stub axle carrier - disc -
calliper" assemblies,
- the "stub axle carrier - disc - calliper" assemblies.
REAR AXLE COMPONENTS
122700
a Unscrew the brake pipe unions (9) .
a Move the component jack with its mounting to the
centre of the rear axle.
a Place a safety strap(s) to attach the rear axle to the
component jack.
a Remove:
- the rear axle bolts (10) positioning the rear axle
arms horizontally,
- the rear axle (this operation requires two people),
- the parking brake cable supports,
- the rigid brake pipes.
REFITTING
I - REFITTING PREPARATION OPERATION
a Always replace:
- the rear axle bolts,
- the shock absorber lower bolts,
- the rear axle guard clips.
II - REFITTING OPERATION FOR PART
CONCERNED
a Refit:
- the rigid brake pipes on the rear axle,
- the parking brake cable supports on the rear axle,
33A-35
33A
122697