Renault Laguna III Manual page 2189

Rear suspension spring: Removal - Refitting
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a Position a component jack under the lower cup of
the spring.
a Remove the shock absorber lower bolt (3) .
a Repeat the operation on the opposite side.
a Remove the component jack to decompress the
rear axle.
a Remove the suspension springs.
a Fit the component jack under the lower cup of the
spring to avoid applying pressure to the rubber
bushes.
REAR AXLE COMPONENTS
REFITTING
I - REFITTING PREPARATION OPERATION
a Always replace:
- the shock absorber bolts,
- the rear axle guard clips.
II - REFITTING OPERATION FOR PART
CONCERNED
18390
a Fit the damper component (4) fully against the end
of the non sheathed spiral.
a Position the « damper component - spring » assem-
bly towards the rear of the vehicle to show the colour
on the spring spirals.
a Refit the shock absorber lower bolts using the com-
ponent jack.
III - FINAL OPERATION
DISCHARGE LAMPS
a Clip on the headlight beam adjustment sensor link-
age.
18802
a Refit:
- the rear axle guard,
- the rear axle guard clips,
- the rear axle guard bolts.
33A-22
33A
18802