Renault Laguna III Manual page 2249

Pressure sensor: Removal - Refitting
REFITTING
I - REFITTING PREPARATION OPERATION
1 - TG1 B sensor
a Always replace:
- the seal with the metal ring (3) ,
- the mechanism (4) ,
- the nut (1) ,
- the cap (5) .
a If necessary, replace the coloured marker (6) .
2 - TG1 C sensor
a - When replacing the valve only
a Always replace the pressure sensor valve (5) .
a parts always to be replaced: tyre pressure moni-
tor valve seal (13,05,03,05) (3) .
b - When replacing the pressure sensor
a parts always to be replaced: Pressure sensor
(13,05,03,01) (2) .
a parts always to be replaced: tyre pressure moni-
tor valve seal (13,05,03,05) (3) .
TYRE PRESSURE MONITOR
II - REFITTING OPERATION FOR PART
CONCERNED
1 - TG1 C sensor
a - When replacing the valve only
a Refit the new valve in accordance with the order of
the arrows.
b - Refitting the pressure sensor
a Refit:
- the cup (3) on the pressure sensor, ensuring that
the bevel of the cup is facing towards the bottom of
the wheel,
- the seal (2) on the cup by placing the conical face
on the wheel rim side,
- the pressure sensor on the wheel rim.
35B-4
35B
137975
138081