Renault Laguna III Manual page 2224

Compensator: Removal - Refitting
4-WHEEL STEERING
II - REFITTING OPERATION FOR PART
CONCERNED
a Refit the compensators.
Note:
The compensator torque tightening is carried out
with:
- the track rod eccentric bolts in the central hous-
ing position,
- the actuator bolts in place.
a Tighten to torque and in order:
- the new bolts of the compensator (105 N.m),
- the new nut of the four wheel drive actuator (84
N.m),
- the eccentric bolt new nuts by lining up the
marks (90 N.m).
a Refit the four wheel drive actuator ball joint cover.
III - FINAL OPERATION.
a Connect the battery (see Battery: Removal - Refit-
ting) (80A, Battery).
a Run a check on the axle geometry (see 30A, Gener-
al information, Axle assemblies: Check, page
30A-19) .
REAR AXLE COMPONENTS
33A-57
33A