Renault Laguna III Manual page 2201

Table of Contents

Advertisement

Complete rear axle system: Removal - Refitting
2-WHEEL STEERING
DISCHARGE LAMPS
a Unclip the headlight beam adjustment sensor link-
age.
a Remove the rear suspension springs (see 33A,
Rear axle components, Rear suspension spring:
Removal - Refitting, page 33A-21) .
a Place a component jack under the lower cup of the
left-hand spring.
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a Unhook the parking brake cables from the callipers.
a Note the routing for refitting.
a Remove the parking brake cables from the stub axle
carriers without damaging the cable protectors.
a Let the parking brake cables hang freely.
REAR AXLE COMPONENTS
124311
a
IMPORTANT
To avoid all risk of damage to the systems, apply
the safety and cleanliness instructions and oper-
ation recommendations before carrying out any
repair (see 3 8 C , Anti-lock braking system,
ABS: Precautions for the repair, page 38C-3) .
a Unlock the wheel speed sensors by pressing care-
fully on the tab (5) of the sensor holder using a flat-
blade screwdriver.
a Unclip the wheel speed sensor wiring at (6) .
33A-34
33A
12522
122694

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents