Renault Laguna III Manual page 2210

Complete rear axle system: Removal - Refitting
4-WHEEL STEERING
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a Remove the unions (18) from the rear brake pipes.
a Fit the tool (Mot. 1390) under the vehicle.
a Lower the lift and put the rear axle horizontallly on
the tool (Mot. 1390).
a Put on a safety strap(s) to attach the rear axle to
the tool (Mot. 1390).
a Remove:
- the rear axle bolts (19) .
- the rear axle.
III - STRIPPING OPERATION FOR PART
CONCERNED
a Remove:
- the four wheel steering actuator (see 33A, Rear
axle components, 4-wheel steering actuator:
Removal - Refitting, page 33A-47) ,
- the rear (see 33A, Rear axle components, Rear
track rod: Removal - Refitting, page 33A-51)
steering con rods,
- the compensators (see 33A, Rear axle compo-
nents, Compensator: Removal - Refitting, page
33A-56) ,
- the rear brake callipers (see 33A, Rear axle com-
ponents, Rear brake calliper: Removal - Refit-
ting, page 33A-8) ,
REAR AXLE COMPONENTS
122697
- the rear brake pads (see 33A, Rear axle compo-
nents, Rear brake pads: Removal - Refitting,
page 33A-3) ,
- the calliper mountings (see 33A, Rear axle com-
ponents, Rear brake calliper mounting: Remov-
al - Refitting, page 33A-13) ,
- the rear brake discs (see 33A, Rear axle compo-
nents, Rear brake disc: Removal - Refitting,
page 33A-15) ,
- the rear stub axle carriers (see 33A, Rear axle
components, Rear stub axle carrier: Removal -
Refitting, page 33A-24) ,
- the guides of the parking brake cables,
- the rigid brake pipes.
REFITTING
I - REFITTING PREPARATION OPERATION
a Always replace:
- the rear axle bolts,
- the shock absorber lower bolts,
- the rear axle guard clips.
II - REBUILDING OPERATION FOR PART
CONCERNED
a Refit:
- the rigid brake pipes,
- the guides of the parking brake cables,
- the rear stub axle carriers (see 33A, Rear axle
components, Rear stub axle carrier: Removal -
Refitting, page 33A-24) ,
- the rear brake discs (see 33A, Rear axle compo-
nents, Rear brake disc: Removal - Refitting,
page 33A-15) ,
- the calliper mountings (see 33A, Rear axle com-
ponents, Rear brake calliper mounting: Remov-
al - Refitting, page 33A-13) ,
- the rear brake pads (see 33A, Rear axle compo-
nents, Rear brake pads: Removal - Refitting,
page 33A-3) ,
- the rear brake callipers (see 33A, Rear axle com-
ponents, Rear brake calliper: Removal - Refit-
ting, page 33A-8) ,
- the compensators (see 33A, Rear axle compo-
nents, Compensator: Removal - Refitting, page
33A-56) ,
33A-43
33A