Renault Laguna III Manual page 2205

Complete rear axle system: Removal - Refitting
4-WHEEL STEERING
Special tooling required
Mot. 1390 Support for removal - refitting
of engine - gearbox assembly
Equipment required
pedal press
component jack
safety strap(s)
Tightening torquesm
brake pipe unions
earth strap bolt
bolts of the fuel tank
bolt of the fuel tank filler
neck
bolts of the automatic-
parking brake mounting
new bolts of the rear
a x l e i n « half-load
position »
new lower bolts of the
shock absorber
rear guard bolts
IMPORTANT
To avoid all risk of damage to the systems, apply
the safety and cleanliness instructions and opera-
tion recommendations before carrying out any
repair (see 33A, Rear axle components, Rear
axle components: Precautions for the repair,
page 33A-1) .
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (02A, Lifting equipment).
a Release the parking brake.
a Fit the pedal press on the brake pedal to limit the
amount of brake fluid running out.
REAR AXLE COMPONENTS
14 N.m
8 N.m
21 N.m
21 N.m
21 N.m
180 N.m
115 N.m
8 N.m
a Remove:
- the rear wheels (see 35A, Wheels and tyres,
Wheel: Removal - Refitting, page 35A-1) ,
- the exhaust silencer (see Silencer: Removal - Re-
fitting) (19B, Exhaust),
- the bolts (1) of the rear axle guards,
- the clips (2) of the rear axle guards,
- the rear axle guards.
33A-38
33A
128340