Renault Laguna III Manual page 2204

Complete rear axle system: Removal - Refitting
2-WHEEL STEERING
ELECTRONIC PARKING BRAKE
a With the ignition on, release the electronic parking
brake:
- pull the handle,
- press the button.
The parking brake system can be heard locking, the
play compensation is set automatically.
a Check that the brake cables are correctly fitted in
their housings.
a With the parking brake released, pull on the end of
the cable; there must be a residual play of 1 to 2
mm.
FOOT BRAKE MANUAL CONTROL
a Adjust the parking brake if not working properly (see
37A, Mechanical component controls, Parking
brake lever: Adjustment, page 37A-33) .
III - FINAL OPERATION
a Refit the rear suspension springs (see 33A, Rear
axle components, Rear suspension spring: Re-
moval - Refitting, page 33A-21) .
DISCHARGE LAMPS
a Clip on the headlight beam adjustment sensor link-
age.
a Refit:
- the rear axle guard,
- the rear axle guard clips (2) ,
- the rear axle guard bolts (1) ,
- the rear wheels (see 35A, Wheels and tyres,
Wheel: Removal - Refitting, page 35A-1) .
a Torque tighten the rear axle guard bolts (8 N.m).
a Bleed the brake circuit (see 30A, General informa-
tion, Braking circuit: Bleed, page 30A-4) .
a With the vehicle on the ground, torque tighten the
shock absorber lower bolts (115 N.m).
REAR AXLE COMPONENTS
33A-37
33A